Building A Bench 101
Here are straightforward written instructions to build a bench. This is based off of The Rehab Life's video. Linked here.
Why not just buy a bench?
I read something online that really stuck with me (and I'm sorry for entering into conspiracy theory land) but I thought it rained true.
But anyways I read a thread or something on X that said we have gone away from great things that humans used to thrive on: making our own furniture, making our own clothes, baking, gardening, growing our own food. We are reliant on different stores in order to survive. And I think that that is true. I barely know how to cook, I can garden (I will say that) but I've never made my own clothes, this bench was the first piece of furniture that I have ever built (but my Austin built 90% of it). On this new adventure as a stay at home Mom I want to be able to make these things. Make a coat of many colors for my babies.
Materials and Tools
One 2" × 4" × 8 ft board
One 2" × 8" × 8 ft board
2½" wood screws
Sanding block
Drill
Saw (truthfully I got every piece of wood cut at Lowe's)
Measuring tape or ruler
Pencil
Step 1: Cut the Wood
Cut the 2" × 4" × 8 ft board into the following pieces:
Four 15½" boards
Four 8" boards
Cut the 2" × 8" × 8 ft board in half to create two 4 ft boards.
You should now have 10 pieces of wood ready to assemble.
Step 2: Assemble the Legs
Take two of the 8" boards and two of the 15½" boards.
Arrange the pieces into a rectangular frame. Place the two 8" boards horizontally at the top and bottom, with the two 15½" boards positioned vertically on the sides.
Secure the corners with your 2½" wood screws, drilling through the outside of the vertical boards into the ends of the horizontal boards. Pre-drilling the holes can help prevent the wood from splitting.
Repeat this process with the remaining four 2" × 4" pieces to create your second leg frame.
You should now have two matching leg frames.
Step 3: Attach the Bench Seat
Place the two 4 ft boards side by side on a flat surface, with their edges lined up evenly. These boards will form the seat of your bench.
Turn the two leg frames upside down and position one at each end of the seat boards. Center each frame across the width of the seat, leaving approximately 1¾" of overhang at each end of the bench.
Once both leg frames are positioned correctly, secure them to the seat boards using your 2½" wood screws. Use four screws per seat board at each leg frame, for a total of eight screws per leg frame.
Pre-drill the holes before driving in the screws to help prevent splitting.
Step 4: Finish the Bench
Carefully flip the bench upright and check that all the screws are secure.
Use your sanding block to smooth any rough edges and surfaces, paying particular attention to the corners and the seat.
If desired, finish your bench with wood stain, paint, or a protective wood finish. Allow the finish to dry completely according to the manufacturer's instructions before using the bench.
Your simple wooden bench is complete!




Comments